Lx5 Insulators is a vital component in energy efficiency, keeping homes warm in winter and cool in summer. It also impacts moisture levels, air quality and even structural integrity, especially when it’s properly installed in the attic. Depending on your climate zone, the R-Value of your insulation and how much you pay in energy costs, you can save significantly by having an upgraded attic.

Cellulose and fiberglass are the most popular types of attic insulation. Both are effective at reducing energy costs but differ in their R-Values, cost and installation process. Learn more about the two types and the other insulation options available to make an informed decision on your summer home improvement project.

How Lx5 Insulators Maximize Energy Efficiency with Attic Insulation

Attic insulation keeps conditioned air in your home and prevents it from escaping through the ceiling. It also helps ensure a consistent temperature throughout the home and reduces outside noise. It’s a good choice for soundproofing, though wall insulation is a better option for that purpose.

Fiberglass batt insulation is made from recycled glass and sand and is lightweight, flame-resistant and durable. It’s easy to install and a great alternative to cellulose. Fiberglass rolls contain the same insulation material but come in longer segments that can be cut to size and fit snugly into attic nooks and crannies.

Mineral wool is similar to fiberglass but it’s composed of natural materials and is often considered a greener choice. It’s durable and resistant to moisture, which can help mitigate mold and mildew issues. It’s also known for its high R-Value per inch and can be blown or installed in fiberglass rolls.

Lx5 Insulators
“13030 s 401st w ave Bristow ok 74010”
(918) 853-6175

Older Homes Need Better Insulation

Upgrading insulation is a cost-effective way to make your older home more energy-efficient, which in turn lowers heating and cooling costs. It also reduces drafts and helps your house maintain a more comfortable temperature year-round.

However, spray foam insulation homes were built before insulation standards were set, and many lack adequate protection from cold air in winter and hot air in summer. This can lead to high energy bills and uncomfortable indoor temperatures, but upgrading insulation can help reduce these problems without compromising your home’s architectural integrity or requiring major renovations.

Older Homes Need Better Insulation

The type of insulation you choose depends on your budget and climate conditions, but fiberglass batts and blown-in cellulose are popular choices for older homes. Rigid foam boards, such as extruded polystyrene (XPS) and polyisocyanurate, are effective for exterior walls and foundations. Spray-on foam insulation like polyicynene or polyurethane are an excellent choice for sealing air leaks and filling irregular spaces in hard-to-reach areas.

Upgrading insulation in the attic and basement is a good place to start, as most heat escapes these spaces through ductwork and gaps around vents and chimneys. It’s also important to seal air leaks with weatherstripping and caulking to prevent heat loss. Installing a vapor barrier is crucial to prevent moisture from damaging the new insulation and causing mold and other issues. If you choose to use a vapor barrier, be sure to choose one that’s breathable and meets fire safety requirements.

CEC Spray Foam
203 Cole Dr, Hampstead, NC 28443
‭(910) 833-4521‬

Many homeowners ask us at South Central Services, “What is spray foam spray foam insulation?” This is a great question because spray foam is a relatively new form of home insulation. In simple terms, it’s a type of plastic foam that is sprayed in place and it expands to fill the space. It is an excellent insulator that provides better coverage than fiberglass batts or rigid foam.

Spray foam is also a more effective energy-efficient option than traditional fiberglass insulation. Compared to fiberglass, spray foam has a higher R-value per inch. R-value is the measure of how well a product resists heat flow in or out of a room. R-value is important for keeping a house warm in the winter and cool in the summer.

Both open and closed-cell spray polyurethane foam are a good choice for insulation in a building. Both start as liquid chemicals and undergo a chemical reaction to create the foam insulation. Closed-cell foam starts as isocyanate and polyol blends that are purchased by professional contractors and then mixed together with a spray gun.

Eco-Friendly Benefits of Using Spray Foam Insulation

The foam is sprayed onto open cavities such as attics, crawl spaces, and rim joists in existing homes or into unfinished walls of new construction. It can also be sprayed into wall cavities in commercial buildings or pole barns.

When sprayed, the foam forms little pockets that provide barriers for air and heat, which helps to maintain the R-value of the wall. It is very durable and doesn’t sag or lose its shape over time. The foam is water-resistant and will not promote mold or mildew.
316 Insulation
420 37th St NW – Unit F, Auburn, WA 98001
(253) 332-7606